Multimeter Auto Range Most multimeters have an auto range function. This function causes the meter to determine the right scale automatically. Simply set the selector switch to the "auto" position, then connect the measuring probes to the inputs. This function has one disadvantage. Because the meter determines the scale on its own, there's a slight delay in processing.In the event of a sudden change in voltage it may take a couple seconds before a reliable reading is displayed This means there's a chance you could take an inaccurate reading while the meter is transitioning to the appropriate scale. 1 The picture opposite shows a multimeter connected across a lamp with a poor contact. The contact breaks every now and then. The multimeter is set to the auto range position. What happens? The value on the meter does not change The decimal point moves across the display. The value fluctuates between 0 and 12V

Answer ALL questions. Write your answers in the spaces provided. Some questions must be answered with a cross in a box 凶 . If you change your mind about an answer, put a line through the box and then mark your new answer with a cross ⊠ . 1 (a) State three differences between radio waves and sound waves. (3) 1 2 3

The diagram shows a prism placed on a horizontal floor. The prism has height 5m The volume of the prism is 30m^(3) The pressure on the floor due to the prism is 55 newtons //m^(2) Work out the force exerted by the prism on the floor.

What is 703g in kilograms? Previous Watch video Answer

9.4.2 Test (CST): Computer-Scored Unit Test Questlon 4 of 25 An electromagnetic wave has a frequency of 3.7 xx10^(18)Hz and a speed of 3xx 10^(8)m//s . Use the equation for wavelength to calculate the wavelength of this wave. A. 8.11 xx10^(-11)m B. 8.31 xx10^(12)m C. 1.11 xx10^(27)m D. 4.51 xx10^(-6)m

09.3.A Questions - Conservation of momentum Name. Testing conservation of momentum 1 During a game of tennis a ball of mass 0.052kg is thrown up vertically and then hit with a tennis racquet. Its horizontal velocity immediately after the serve is 250kmh^(-1) . a What is the horizontal velocity of the ball in ms^(-1) ? 250 xx1000-:60^(2)=69.4ms^(-1) 69ms^(-1) b Calculate the horizontal momentum of the ball immediately after it is served. (1 mark) 0.052 xx69=5.0kyms^(-1) (1 mark) c The racquet and ball are in contact for 0.08s . Calculate the net force acting on the ball due to the racquet. (2 marks)

A piece of cheese has a mass of 232g and a density of 1.6g//cm^(3) . Calculate the volume of the cheese.

A satellite travelled at a speed of 7473 metres per second for 2872 seconds. Use a calculator and the formula below to calculate the distance that the satellite travelled during this time. Give your answer in metres (m) to 3 s.f.

A watering can holds 0.00031m^(3) of water. What is this volume in mm^(3) ?

f. State the condition for total internal reflection of light to occur g. State the law of refraction of light h. List the properties of light wave and explain any two of them with the aid of a diagram i. The critical angle for a transparent substance is 39° . Calculate the refractive index.

PHYSICS A catapult used to hold a stone of mass 500g is extended by 20cm with an applied force F . If the stone leaves with a velocity of 40ms^(-1) , the value of F is A. 4.0 xx10^(4)N C. 2.0 xx10^(3)N B. 4.0 xx10^(3)N D. 4.0 xx10^(2)N m+500,=0.5ks e=20cmquadc_(0)=0.2m v=arm-1^(-1) The frictional force is independent of the area of the surfaces in contact. The frictional force depends on the nature of the surfaces in contact. III. The frictional force depends on the speed of sliding. IV. The frictional force is directly proportional to the normal reaction. Which combination of the above is true of sliding friction? A. I, II and IV C. I, III and IV B. I, II and III D. II, III and IV The velocity v of a particle in a time t is given by the equation v=10+2t^(2) Find the instantaneous acceleration after 5 seconds. sqrtv=10+2l^(2) A. 10ms^(-1) B. 15ms^(-1) C. 20ms^(-1) D. 60ms^(-1) sqrt=+0+2xx5^(2) 4. If the force and the velocity on a system are each reduced simultaneously by half, the power of the system is A. Doubled ℓ . Reduced to a quarter B. Constant Đ. Reduced by half 5. The velocity ratio of a machine is 5 and its efficiency is 75% . What effort would be needed to lift a load of 150N with the machine? A. 50N B 40N C. 30N D. 20N